Versatile solutions

Up to 14 bar thanks to the PACE controller

Low noise level perfect for residential areas

As low as 61 dB(A) , the same level as a normal conversation
E-Air H250 VSD
E-Air H450 VSD
E-Air V1100 VSD

Looking for spareparts?

The most silent compressor to power your working site

<p>61</p>
dB(A)

Comparable to the sound level of a normal conversation.

50 %

Savings on your operating costs

2000 hours

Service intervals. Or once every 2 years.

Noise maximum 61 bB(A)

Which is about the sound level of a normal conversation

Improved efficiency

The E-Air’s VSD integrated permanent magnet motor offers unmatched performances. Especially when running at partial load, a VSD compressor offers an efficiency gain of up to 50%; that is a lot of energy and money saved.

Less maintenance

No diesel engine, means less service. You'll only only have to perform preventative maintenance every 2000 hours, or 2 years. Another good way to save time and money.

No diesel emissions

Ideal for low noise and emission zones or indoor applications

Set the pressure with PACE

Change the pressure of your Atlas Copco mobile air compressor with the touch of a button. Thanks to PACE technology ("pressure adjusted through cognitive electronics") , one compressor can tackle multiple applications. And there are more advantages: such as additional flow at a lower pressure setting and fuel savings

Variable speed drive permanent magnet electric motor

Just plug and play, with low start-up currents. This energy-efficient motor is silent, compact and ruggedized for the harshest conditions

Discover the range of E-Air VSD electric variable speed mobile compressor
For the right application, the benefits of going electric cannot be overstated: from improved noise levels to no diesel engine emissions; and from improved efficiency to simpler service. Why should you not go electric? As long as you have an electric power source on your site, the electric compressor will always be the most efficient solution.
The beating heart of a E-Air VSD compressor is a variable speed drive, permanent magnet motor, an electric motor that achieves unrivaled efficiency benefits and very low noise levels. The integrated permanent magnet motors of the E-Air H250 VSD and E-Air H450 VSD are an in-house Atlas Copco development, ruggedized for outdoor applications. This motor has its windings potted in resin, so it's completely closed off against water and dust (IP 66). Permanent magnet motor of the E-Air VSD - inside view
Plug-and-play versatile electric compressor

Every E-Air VSD comes with PACE technology (Pressure Adjusted through Cognitive Electronics), an electronic pressure regulation system. You select the pressure in the compressor’s controller, your application dictates the flow, the PACE controller locks in and regulates the perfect combination. Setting the pressure is a matter of 3 clicks and you can choose a pressure at increments of 0.1 bar.

One compressor can cover the needs of various applications. From 5 bar to run a handheld tool, to 10 bar for sandblasting to up to 14 bar for cable blowing, all with one machine. A conventional, fixed speed compressor runs at a fixed pressure level, delivering a corresponding maximal flow rate. A PACE compressor however, can deliver additional flow at lower pressure settings. When the load goes down, PACE finetunes the motor speed accordingly, which saves energy... and money. Read more about PACE

PACE versatile controller electric compressor, increase utilisation rate, improve ROI
Product variations
E-Air H250 VSD; E-Air H450 VSD; E-Air V1100 VSD
Quick links
More information